Net Media SC01 Specifications
Also see for SC01: Troubleshooting tips
    | |
MAN-MODJBOX REV0707ANM-MODJBOXNM-MODJBOX (SC01 SC02 SC03)NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.comInstallation Procedures:1. Set the channel with the switches as shown in Figure 1. Choose an unused channel that matches the tuning mode of thetelevisions. With antenna tuning, choose a UHF channel from 14-69. With cable tuning, choose a CABLE channel from 70-94or 100-125. There must be at least one blank channel on either side of the modulated channel to separate it from any otherbroadcast, cable, or modulated source. When combining with cable service, be aware that digital data typically interfereswith channels 80-117, even when not subscribed to digital services. Channels 120-125 often work without any filtering.2. Ensure that the camera is grounded with the ground strap as shown in the FCC Information. Connect a coax cable fromthe camera’s F connector to the “MOD” side of the Power Injector. Connect the “TV” side of the Power Injector to thegrounded coax from a television or distribution system. Connect the 12V DC 300mA power supply to an AC outlet andthe Power Injector. The camera picture is now available on the programmed TV channel.3. Install Camera Assembly into junction box (not included) and adjust for proper viewing.4. Snap the dark or clear Lens Cover into the Cover Plate (not included) by pressing all four corners in simultaneously.5. Attach the Cover Plate to the Junction Box. Silicon or similar sealant may be used as needed.Figure 1 - Setting the modulated channel with the switches. Valid channels are UHF 14-69, CABLE 70-94, 100-125.80 40 20 10 8 4 2 1ONOFFCABLE Channel 125Add the numbersprinted on thecircuit board.80 40 20 10 8 4 2 1ONOFFUHF Channel 25DO NOT CUT OR SPLICE THE CAMERA’S CABLES. MODIFYING THE UNIT IN ANY WAY WILL VOID THE WARRANTY. DAMAGE FROMEXPOSURE TO MOISTURE, STATIC DISCHARGE, OR OTHER HARMFUL ENVIRONMENTAL FACTORS IS NOT COVERED BY THE WARRANTY.Figure 3 - Connecting the camera to a satellite system and distributing to multiple televisions.Figure 2 - Connecting the camera to an antenna or cable service and distributing to multiple televisions.Dual LNBSatelliteSatelliteMultiswitchw/Ant inputSatelliteDiplexerTelevisionSatellite ReceiverSat InAnt InPower InjectorCameraMain cable orAntennaTelevisionTelevisionPower InjectorDistributionPanelor SplitterCameraOptional Ch. 70-80 Filter (NM-CNF7080)when there are no clear cable channels.Splitter/Combiner |
Related manuals for Net Media SC01
manualsdatabase
Your AI-powered manual search engine