Netopia 3366-ENT Getting Started Manual

Also see for 3366-ENT: Firmware user manual Frequently asked questions

Contents

Netopia 3366-ENT Getting Started Manual Manual pdf 17 page image

Configuring TCP/IP 4-1CCCChhhhaaaapppptttteeeerrrr 4444CCCCoooonnnnffffiiiigggguuuurrrriiiinnnngggg TTTTCCCCPPPP////IIIIPPPPOnce you have set up your physical local area network, you will need to configure Internet Protocol (TCP/IP) oneach client workstation connected to your Netopia 3366-ENT. This chapter describes how to configure TCP/IPfor both Windows-based and Macintosh computers.This chapter explains the following topics:• “Configuring TCP/IP on Windows-based Computers” on page 4-1• “Configuring TCP/IP on Macintosh Computers” on page 4-3Configuring TCP/IP on Windows-based ComputersConfiguring TCP/IP on a Windows computer requires the following:• An Ethernet card (also known as a network adapter)• The TCP/IP protocol must be “bound” to the adapter or cardMicrosoft WindowsStep 1. Navigate to the TCP/IP Properties Control Panel.a. Some Windowsversions follow a pathlike this:Start menu -> Settings -> Control Panel ->Network (or Network and Dial-up Connections-> Local Area Connection -> Properties) ->TCP/IP [your_network_card] or InternetProtocol [TCP/IP] -> Properties