Multiple Network Address Translation 9-7You can configure a simple 1-to-many PAT (often referred to simply as NAT) mapping using Easy Setup. Morecomplex setups require configuration using the Network Address Translation item on the IP Setup screen.An example MultiNAT configuration at the end of this chapter describes some applications for these features.See the MultiNAT Configuration Example on page 9-26.In order to configure the router to make servers on your LAN visible to the Internet, you use advanced featuresin the System Configuration screens, described in IP setup.IP setupTo access the NAT configuration screens, from the Main Menu navigate to IP Setup:Select Network Address Translation (NAT) and press Return.MainMenuSystemConfigurationIPSetupIP SetupEthernet IP Address: 192.168.1.1Ethernet Subnet Mask: 255.255.255.0Define Additional Subnets...Default IP Gateway: 127.0.0.2Primary Domain Name Server: 0.0.0.0Secondary Domain Name Server: 0.0.0.0Domain Name: isp.comReceive RIP... BothTransmit RIP... OffStatic Routes... IP Address Serving...Network Address Translation (NAT)...Set up the basic IP attributes of your Netopia in this screen.
