NRP1002/P IP Phone User Manualwww.newrocktech.com 54/688.20 PHONE / AdvancedUser can configure the advanced configuration settings in this page. Screen Configuration.Enable Energy savingBacklight Time LCD Menu Password Settings.The password is 123 by default. Keyboard Lock Settings. Configure Greeting WordsThe greeting message will display on the top left corner of the LCD when the device is idle, which is limited to12 characters. The default chars are ‘VOIP PHONE’.8.21 PHONEBOOK / ContactsUser can add, delete, or edit contacts in the phonebook in this page. User can browse the phonebook andsorting it by name, phones, or filter them out by group.To add a new contact, user should enter contact’s information and press “Add” button to add it.To edit a contact, click on the checkbox in front of the contact, the contact information will be copied to thecontact edit boxes, press “Modify” button after finished editing.To delete one or multiple contacts, check on the checkbox in front of the contacts wished to be deleted andclick the “Delete” button, or click the “Clear” button with selecting any contacts to clear the phonebook.User can also add multiple contacts into a group by selecting the group in the dropdown options in front of“Add to Group” button at the bottom of the contact list, selecting contacts with checkbox and click “Add toGroup” to add selected contacts into the group.8.22 PHONEBOOK / Cloud PhonebookCloud PhonebookUser may configure up to 8 cloud phonebooks. Each cloud phonebook must be configured with an URLwhere an XML phonebook is stored. The URL may be based on HTTP/HTTPs or FTP protocol with or withoutauthentication. If authentication is required, user must configure the username and password.To configure a cloud phonebook, the following information should be entered,Phonebook name (must)Phonebook URL (must)Access username (optional)Access password (optional)LDAP SettingsThe cloud phonebook allows user to retrieve contact list from a LDAP server through LDAP protocols.User must configure the LDAP Server information and Search Base to be able to use it on the device. If theLDAP server requests an authentication, user should also provide username and password.