User Manual NRP1012 Series IP Phone5-8 www.newrocktech.com5.4 Network5.4.1 WANFigure 5-9 WAN setting interfaceTable 5-7 WAN parameters settingName DescriptionWAN StatusActive IP Address Specifies the current IP address of the phone.Current SubnetMask Specifies the subnet mask of the phone.Current IPGateway Specifies the current gateway IP address of the phone.MAC Address Specifies the MAC address of the phone.MAC Timestamp Specifies the time when the MAC address is obtained.WAN SettingsObtain DNSServerAutomaticallyIndicates whether to obtain the DNS address in DHCP mode. If the value is set toDisabled, you will obtain the DNS address in static IP mode. The default value isEnabled.Static IPIndicates whether to enable the static IP mode. If you can obtain a fixed IP addressfrom the ISP service provider, you can enable this mode and fill up information such asthe static IP address, subnet mask, gateway, and DNS domain name. The precedinginformation can be obtained from the ISP service provide or network administrator.
