5Pull out the power plug during thunderstorms. Do not touch the product when lighting to avoid electric shock. Install or place components which power supply voltage is high enough to cause personalinjury in places out of the reach of children.Do not cover or block up any vents on the product. The overheated components may cause fire, damage the product and shorten the service life. Do not put the venting surface of the product facedown. Do not install the product on a carpet or bed clothes. Do not use a cloth such as table cloth to cover the product.Do not touch the power cable with wet hands to avoid electric shock.Do not install the product in high temperature environments. Do not install the product near heat source, such as the radiator, the heat reservoir, the stoveor other heating devices. Do not expose the product under sunlight, which may cause high temperature and subsequentfaults in the product.For transport: Pack the product for mobility or maintenance by using the cartons and cushioning materialprovided with the product. Vertically move the product during transport. The screen or other components are easilybroken if the product is moved by an improper way.Keep away from the product when you use a radio.The product design to prevent radio interference complies with the international EMI standard.However, the interference still exists and causes noise in the radio. If noise occurs in the radio, try the following solutions. Adjust the direction of the radio antenna to avoid the interference from the product. Keep the radio away from the product.