Nexgrill 720-0783E User Manual

Contents

Nexgrill 720-0783E User Manual Manual pdf 19 page image

3. Be sure all gas connections are securelytightened.4. Turn on gas supply.5. Open the grill main lid.6. Push and turn any main burner control knob toHIGH position. Push Electronic Ignition buttonfor 3 to 5 seconds to light burner.7. If the burner does not light after 5 seconds, turnknob to OFF. Turn gas OFF at LP tank andwait 5 minutes for gas to clear. Then turn gasON at tank and repeat step 58. If burner still does not light, see Match Lightingsection and If Grill Still Fails to Light section onthe following page.9. To light additional burners, turn burner knob(s)to HIGH. Push and hold electronic ignitionbutton to light burner. Adjust knob(s) to desiredsetting.• Make a 50/50 (soap/water) mild soap solution.• Turn the control knobs to full OFF position; then turngas ON at supply tank.• Apply the soap solution with a clean brush to all gasconnections. See below. If growing bubbles appearin the solution the connections are not properlysealed. Check each fitting and tighten or repair asnecessary.• If you have a gas connection leak you cannot repair,turn gas OFF at supply tank, disconnect fuel linefrom your grill and call 1-800-913-8999 or your gassupplier for repair assistance.• Also apply soapy solution to the tank seams. Seebelow. If growing bubbles appear, shut tank OFFand do not use or move it! Contact an LP gassupplier or your fire department for assistance.Grill Lighting Instructions for Main Burners1. Do not smoke while lighting grill or checking gassupply connections.2. Be sure that LP gas tank is sufficiently full.WARNINGFailure to open grill lid during the lightingprocedure could result in a fire or explosionthat could cause serious bodily injury, death,or property damage.19Gas Tank Leak CheckChecking for LP gas leaksNever test for leaks with a flame. Prior to first use, atthe beginning of each season, or every time your LPgas tank is changed, you must check for gas leaks.Lighting Instructions