Nexo PS8 User Manual

Also see for PS10: User manual User manual Quick start guide

Contents

Nexo PS8 User Manual Manual pdf 27 page image

AMPLIFIERS___________________________________________________________________________________________________P.27OutputsThe two Speakon connectors are automatically configured with a visual indication of the current wiring.Configuration can be made while the system is operating.• Sub On = 3 amplifier channels :The two PS10 Stereo channels are assigned to poles 2+ and2- on the L & R Speakons. A single PS10 LED lights up oneach Stereo channel.The LSub 500 channel is Mono L+R summed and assigned inparallel to poles 1+ and 1- of both Speakons. The LS500 LEDlights up.• Sub Off = 2 amplifier channels:The two PS10 Stereo channels are assigned to poles 2+ and 2- on the L & R Speakons. Two PS10 LEDsare lighted on each channel. Poles 1+ and 1- of both Speakons are disconnected. The LS500 LED is off.Sub Bass ChannelThe LSub On Switch automatically reconfigures the PSAmp according to its two operating modes :• Sub On = 3 amplifier channels :2 x 430 Watts into 8 Ohm channels feed two PS10s in Stereo.1 x 850 Watts into 4 Ohm channel feeds the LSub 500 in Mono L+R.• Sub Off = 2 amplifier channels :2 x 850 Watts into 4 Ohm channels feed two or four PS10s in Stereo.The 1700 W power capability of the PSAmp is always used whether or not theLSub is operated. The Sub amplifier channel is rerouted to the PS10s in theSub Off operating mode. In both cases the installation is always stereophonic.Level controlThe Level control operates simultaneously on all 2 or 3 channels according toconfiguration.The LSub Level control adjusts the relative level of the LSub relative to the PSwhen Sub is On.It is independent of overall Level control.