11Locating and Installing the MountFor these steps you will need the following parts:• Mounting Template• (4) Lag BoltsStep 9: Using the Mounting Template and tape, determine how high your mount needs to be located accordingto the [D] Shelf Depth measured in Step 8 and the below table.Note: The Transcend Pro Surface must always be able to lower its full travel with no obstructions.Step 8: Measure depth [D] of your Shelf or Mantel, if you do not have a Shelf or Mantel proceed to the next step.Shelf Depth [D] Mount Height [H]Step 8 Step 9