Nidec Digistart D2 User Manual

Contents

Nidec Digistart D2 User Manual Manual pdf 18 page image

7 Technical Data• Mains SupplyMains voltage (L1, L2, L3)D2-14-xxx ............................................................................. 3 x 200 VAC ~ 440 VAC (+ 10% / - 15%)D2-16-xxx ............................................................................. 3 x 200 VAC ~ 575 VAC (+ 10% / - 15%)Mains frequency (at start) .................................................................................................... 45 Hz to 66 HzRated insulation voltage ................................................................................................................ 600 VACForm designation ................................................................ Bypassed semiconductor motor starter form 1• Control voltage (CSH, CSL, CSR)D2-1x-xxx-C1 ............................................................................................... 110-240 VAC (+ 10% / - 15%)or 380-440 VAC (+ 10% / - 15%)D2-1x-xxx-C2 ............................................................................................ 24 VAC /VDC (+ 10% / - 15%)Recommended fuse .......................................................... 1 A continuous (10 A max, 0.01 second surge)Current consumption (during run) ................................................................................................ < 100 mACurrent consumption (inrush) .............................................................................................................. 10 A• InputsStart (terminal DI1) .............................................................................. Normally open, 150 kΩ @ 300 VACStop (terminal DI2) ........................................................................... Normally closed, 150 kΩ @ 300 VACMotor thermistor ...................................................................................................................... Trip > 3.6 kΩ• OutputsMain contactor relay (terminals COM2, RLO2) ..................................................................... Normally open6 A, 30 VDC / 6 A, 250 VAC resistiveProgrammable relay (terminals COM1, RLO1) ..................................................................... Normally open....................................................................................................... 6 A, 30 VDC / 6 A, 250 VAC resistive• EnvironmentalDegree of Protection D2-018 to D2-100 .............................................................................................. IP20Degree of Protection D2-140 to D2-200 .............................................................................................. IP00Operating temperature .................................................................................................... - 10 °C to + 60 °CStorage temperature ..................................................... -25 °C~+ 60 °C (to +70 °C for less than 24 hours)Humidity ........................................................................................................... 5%~95% Relative HumidityPollution degree ............................................................................................................. Pollution Degree 3Vibration ....................................................................................................... IEC 60068 Test Fc Sinusoidal4 Hz to 13.2 Hz: ± 1 mm displacement....................................................................................................................... 13.2 Hz to 200 Hz: ± 0.7 g• EMC EmissionEquipment class (EMC) .................................................................................................................. Class BConducted radio frequency emission ............................................. 0.15 MHz to 0.5 MHz: < 56-46 dB (μV)0.5 MHz to 5 MHz: < 46 dB (μV)5 MHz to 30 MHz: < 50 dB (μV)Radiated radio frequency emission ................................................... 30 MHz to 230 MHz: < 30 dB (μV/m).................................................................................................. 230 MHz to 1000 MHz: < 37 dB (μV/m)• EMC ImmunityElectrostatic discharge ............................................................. 4 kV contact discharge, 8 kV air dischargeRadio frequency electromagnetic field .............................................. 0.15 MHz to 1000 MHz: 140 dB (μV)Rated impulse withstand voltage (Fast transients 5/50 ns) ................ 2 kV line to ground, 1 kV line to lineVoltage dip and short time interruption ................................................... 100 ms (at 40% nominal voltage)Harmonics and distortion ........................................................... IEC61000-2-4 (Class 3), EN/IEC61800-3• Short CircuitRated short-circuit current D2-018 to D2-048 .................................................................................... 5 kA 1Rated short-circuit current D2-060 to D2-200 .................................................................................. 10 kA 11 These short circuit ratings are with fuses used as given in the table under Semiconductor Fuses onpage 11.18 Digistart D2: User GuideIssue: F