Nidec POWERDRIVE FX Series Installation Manual

Nidec POWERDRIVE FX Series Installation Manual Manual pdf 27 page image

27OPTIONSPOWERDRIVE FX Installation guide4729 en - 2017.08 / c5.1.3 - MDX-Powerscreen5.1.3.1 - GeneralThe interface is a touch screen which can be used to accessvarious menus. It is supplied with its own connection cable(2 metres).After the loading phase following powering-up of the drive, theparameter-setting interface displays the screen below.Ref. FunctionA 4.3” touch screenB Touch-sensitive button for access to the main menuC "PWR" LED, indicates the state of the interfacepower supplyD Touch-sensitive buttons for language selection(can take a few minutes to load)5.1.3.2 - ArchitectureFrom the welcome screen, press the button to access themain page of the parameter-setting interface, consisting of 5touch-sensitive buttons:- Information: Can be used to obtain information very quicklyabout the drive, the fieldbus option, the parameter-settinginterface, and can also be used to select the language.- Read mode: Is used to display the status of the drive whenstopped or during operation, as well as its main measurementpoints.- Setting: Used for reading and/or modification of all the driveparameters, as well as to set the date and time on the display.- Control via keypad: Gives dirtect access to motor controlvia the touch screen (Run/Stop, direction of rotation, speedreference). These screen parameters can be set using theParameter setting/Parameter setting via the keypad menu.Control via the keypad is disabled in factory-set configuration.- Trip history: Gives a quick overview of the drive's last 10trips.- : This button is accessible from all screens in factory-set configuration and is used to give a stop command (can bedisabled).At any time and regardless of the screen displayed, thebutton can be used to return to previous pages, as far as theinterface main page.For further information, see the commissioning manualref.4617.5.1.3.3 - InstallationThe interface is through-panel-mounted in the front of acabinet (IP65/NEMA 4 pounting).94 mm102 mm120 mm128 mmPlan de découpe5.1.4 - MDX-SOFTThe MDX-SOFT enables parameter setting or supervision ofthe POWERDRIVE FX from a PC. Numerous functions areavailable:- Fast commissioning- LEROY-SOMER motor database- File saving- Online help- Comparison of 2 files or one file with the factory settings- Printing of a complete file or differences compared to thefactory settings- Supervision,- DiagnosticsTo connect the PC to the POWERDRIVE FX, use an"MDX-USB Isolator" isolated USB cable.This software can be downloaded from the Internet at thefollowing address:http://www.emersonindustrial.comPowerdrive FX can be set via the USB connector, even if thedrive is not powered.Attention. In this case, options modules will not be poweredand settings will not be saved. To make an option modulesetting / backup , it is necessary to provide an auxiliary powersupply.