Nidec-Shimpo TT-0.5 Operation Manual
      |
The TT Digital Torque Tool Tester is a simple operation test instru-ment for quickly checking torque tool performance. The TT Seriesprovides exceptional accuracy for measuring torque on variousproducts including torque wrenches, manual screwdrivers, elec-tric screwdrivers, pneumatic screwdrivers and other torque con-trolled power tools.The TT’s provide long operation life and power flexibility with theability to work from the internal rechargeable battery or includedAC adapter. The TT’s have four modes of operation: Track for livereadings, Peak which records the highest level over a test, FirstPeak which records the first peak reading over the test and Track/Peak which shows both the live readings as well as the peak read-ing recorded.The backlit display provides an analog bar graph on screen toallow the user to know where the resultant torque is currently po-sitioned compared to the full scale range of the unit. CW/CCWicons along with programmable pass/fail LED’s ( HI/OK/LO) assistusers with ensuring proper test set up along with enabling a quickdetermination of the results.Every tester comes standard with USB and RS-232 output. TheTT’s software enables the uploading of data and the additionalstatistical analysis with its auto-calculation of the selected values.These excellent features make the TT Torque Tool Testers a valu-able and versatile addition to the production and quality controldepartments.TT Torque Tool TesterOperation ManualNIDEC-SHIMPO INSTRUMENTS1) Overloading the transducer does not only damage the transducer butmay break the transducer head and could result in injury!2) Torque ranges of 25 N-m and higher must be fastened properly with 4bolts and nuts to a secure work surface, either horizontally or vertically.Failing to do so may result in damage to the transducer and could resultin injury to the operator. Ranges 10 N-m and lower do not require mount-ing and may be used with the included rubber feat as long as precautionis taken and unit is secured to prevent slippage.3) Ensure that the torque wrench’s driver has engaged the transducersocket properly when operating. The transducer head may be damagedif not engaged properly and could result in injury to the operator.4) Please make sure that you have safety gear and safety precautionsin place when applying torque to the transducer or when calibratingthe transducer.5) Do not use a charger other than the unit supplied with the TT torquetester. Using the incorrect charger may result in damage to the Ni-MHrechargeable batteries.SPECIFICATIONSAccuracy: ± 0.5 % of full-scale.(Includes Creep, Non-linearity &Temperature Shift at zero load)Units of Measure: N-mm, N-cm, N-m, in-lb, ft-lb, kg-cm, kg-m(depending on range)Measure Modes: Track, Peak, First-Peak, Track/PeakTool Socket Size: Dual 3/8”, 20 mm female square.Overload Protection: 120% of Full ScaleMax. Mounting Torque: 150% of Full ScaleSampling Rate: 1000 HzPeak Capture Rate: 0.10 SDisplay: 175 x 1.125˝ (44.4 x 28.6 mm) dot matrix backlit LCDOperating Temperature: 60 - 95 ºF (15 to 35 ºC)Storage Temperature: 5 - 149 ºF (-15 to 65 °C)Humidity Limit: Maximum 70% rH.Power Requirement: 500 mA 9 VDCCharging Time: Approx. 14-16 Hours for Full ChargeBattery Operation: 12 HoursOutput: USB 8 data bits Baud rate: 38400Communication Ports: Both RS232 & USB simultaneous outputSize: 4 x 8 x 2” (100 x 200 x 50 mm);TT-25: 4 x 9.8 x 2.3” (100 x 250 x 58 mm)Product Weight: 2.4 lb (0.9 kg); TT-25: 4.9 lb (2.22 kg)Package Weight: 5.1 lb (2.3 kg); TT-25: 7.7 lb (3.49 kg)Warranty: 1 yearIncluded Accessories: USB cable, charger adapter, cal. cert.,3/8” Hex rundown adapter (1, 5 & 10 N-m ranges only).Optional Accessories: RS-232 cable, Rundown adaptersprings, Rundown adapters. Note: Software available for freedownload at www.shimpoinst.com.99 Washington StreetMelrose, MA 02176 Phone781-665-1400 Toll Free1-800-517-8431Visit us at www.TestEquipmentDepot.com |
Related manuals for Nidec-Shimpo TT-0.5
manualsdatabase
Your AI-powered manual search engine