0478-0017-033.2 Preparing the backplateFigure 3-2 Backplate mounting detailPrepare the backplate in accordance with the mounting dimensions shown in Figure 3-2.3.3 Preparing for installationFigure 3-3 Installing the gasket1. Install the main gasket with the kit provided as shown (1).2. The image on the right shows the assembled drive and gasket (2).359 mm(14.13 in)83 mm (3.27 in)365 mm(14.37 in)400 mm(15.74 in)200 mm (7.87 in)67 mm(2.64 in)134 mm (5.28 in)109 mm (4.29 in)97 mm (3.82 in)36.5 mm(1.44 in)5.20 mm (0.21 in)x 8 holes73 mm (2.87 in)36.5 mm(1.44 in)15 mm(0.59 in)129 mm (5.08 in)26 mm (1.02 in)168 mm (6.61 in)359 mm (14.13 in)389 mm (15.32 in)26 mm (1.02 in)Radius 1.0 mm (0.04 in)38 mm(1.50 in)38 mm(1.50 in)76 mm (2.99 in)

preparing for installation

Nidec Unidrive M600 Mounting Installation Sheet

Unidrive E200