Nidec Unidrive M702 Control Getting Started Manual

Nidec Unidrive M702 Control Getting Started Manual Manual pdf 16 page image

16 Unidrive M702 / HS72 Control Getting Started GuideIssue Number: 44.2 Keypad / display4.2.1 Understanding the displayThe keypad can only be mounted on the drive.4.2.2 KI-KeypadThe KI-Keypad display consists of two rows of text. The upper row shows the drive status or themenu and parameter number currently being viewed. The lower row of the display line shows theparameter value or the specific trip type. The last two characters on the first row may display specialindications. If more than one of these indications is active then the indications are prioritized asshown in Table 4-1.When the drive is powered up the lower row will show the power up parameter defined by ParameterDisplayed At Power-up (11.022).Table 4-1 Active action iconFigure 4-1 KI-Keypad1. Escape button2. Start reverse (Auxiliary button)3. Start forward4. Navigation keys (x4)5. Stop / Reset (red) button6. Enter buttonThe red stop button is also used to reset the drive.Active action icon Description Row(1=top)Priorityin rowAccessing non-volatile media card 1 1Alarm active 1 2Keypad real-time clock battery low 1 3or Drive security active and locked orunlocked 1 4Motor map 2 active 2 1User program running 3 1Keypad reference active 4 1NOTE