49 Rev 0017.19 Do I need to turn Interpolation off?Interpolation is on by default as it smoothes the image to provide a bettervisual image. Turning it off gives a more pixelated image. Some users maywish to observe the scene with the actual resolution of the detector.Interpolation off Interpolation onFig 1 Fig 2How do I set Interpolation1. Press Hotkey 4 to select the menu (Fig 3).2. Infrared Settings” is highlighted. Press Hotkey 3 to select it3. Use the up/down navigation buttons to highlight the Interpolation option(Fig 4).4. Use the left/right navigation buttons to toggle between on and off.5. Press Hotkey 4 to exit.Fig. 4Hotkey 1 Hotkey 2 Hotkey 3 Hotkey 4Fig 1.Centre toggle buttonUp/Down, Left/Rightnavigation buttons.
