Nietzsche BT-868 User Manual
                     | |
5Turning the Headset On or OffTurning the Headset ONIf your Headset is switched off, press and hold S1 for 2 seconds. The Headsetindicator light begin to flash blue once in every 3 seconds. This indicates theHeadset is powered up, and it is at stand-by-mode.NOTE: The Headset will be turned ON automatically when a charged battery isinserted onto the headset.Turning the Headset OFFOnce you have finished using the Headset, press and hold S1 for 2 seconds and theheadset will be powered down. The Headset indicator light will be switched offwhen the Headset is powered down.NOTE: For Nokia mobile phones, you have to disconnect the connection betweenBT-868 and your mobile phone first before you can turn the BT-868 off.Pairing the HeadsetPairingBefore using the Headset with a Bluetooth-enabled device for the first time, youmust pair the Headset with that device, for example, a mobile phone.Pairing is the process of linking and creating a trusted relationship between twoBluetooth devices, so that they can communicate. To validate these twoBluetooth devices to each other and create a trusted relationship between them, aBluetooth passkey (or PIN) is required. The default passkey stored in the BT-868internal memory is [1234]. You are usually required to enter the passkey onthat device during pairing.The pairing only needs to be done once. You do not need to pair it again until youwant to use it with another device. Afterwards, every time you switch on yourHeadset, it will automatically connect to your mobile phone. Please note,however, Nokia Bluetooth mobile phones required you to reconnect to it manually. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine