Night Owl F SERIES User Manual

Also see for AHD7-841: Installation instructions Remote Monitoring Guide Software setup guide

Night Owl F SERIES User Manual Manual pdf 21 page image

40 41F DVR Series Users Manual Chapter 7: Menus and Settings7.2 Cameras MenuAdjust or modify individual camera settings connected to your DVR.7.2.1 SettingsChannel: select the channel you want to configure a camera for.Channel Name: create a name for the selected channel; this name will bedisplayed on-screen during live view and playback.Position: change the position of Channel Name while viewing in Live View. Forexample U-L = Upper-Left; D-L= Down Left; U-R=Upper Right; D-R=Down RightColor: click Setup to access a sub-menu to adjust the colors of the selectedchannel. In this sub-menu you can adjust the Hue, Brightness, Contrast, andSaturation of the image.Covert: Enable or Disable the display of this channel. Enabling the Covert modewill not affect the channel’s recording functions; only block the channel whileviewing in live view mode.Record Time: Enable or Disable the recording time display on-screen duringplayback mode.Show Time: Enable or Disable the on-screen timestamp during live view mode.7.1.3 Alarma. Motion: configure the motion alarm settings for your DVR system.Channel: select the channel to configure motion alarm settings.Enable: activate motion alarms.Sensitivity: adjust the level of motion detection. A lower setting will require moremovement in the camera range to begin recording.Buzzer: toggle between ON and OFF to enable an audible alert from the DVR.Post Recording: set the amount of time to record after the motion is detected. Youcan select between 30 and 300 seconds.Area: clicking Setup will allow you to configure areas which will and will notdetect motion. Red boxes denote areas that will detect motion and uncoloredboxes show areas that will not. When finished, right click to go back to menu.Show Message: check the tick box to enable the display of a red “M” on-screenwhile in Live View mode. “M” means motion is occuring.Send Email: check the tick box to send an email alert when motion is detected.See section 7.1.2. for email setup and configuration.Full Screen: when this tick box is checked, the selected channel will go to fullscreen when motion is detected.Record Channel: this option gives you the ability to start recording on thechannels you select/highlight as soon as motion has been detected on the Channelselected above within the Channel field.