Night Owl HDA Series User Manual
Also see for HDA SERIES: User manualUser manual
                                                                               | |
18 HDA Series Users ManualChapter 4: Camera Installation4.1 Video/Audio*NOTE: Connect all cameras locally before nal placement to ensure that allcomponents function properly.1. Locate an included 60 foot camera cable.2. Connect a camera to one end of the cable by matching the BNC connectors(yellow) and DC power connectors (red).3. Audio enabled cameras will have an additional (white) RCA connection whichwill transmit the audio signal and will connect to the audio in port on the backof your DVR.4. Plug BNC connectors on the other end of the cable into a Video Input port onthe back panel of the DVR.5. Repeat for each camera, noting the channel number each camera is pluggedinto.4.2 Power4.2.1 Standard Camera Power1. Locate an included power splitter.2. Connect the power splitter to the remaining DC power connectors (red) of thecables.3. Plug the power splitter into the labeled camera power supply, then plug thecamera power supply into an available wall outlet or UPS. Keep in mind, NightOwl always recommends utilizing a surge protector to minimize the risk ofdamage caused to your DVR in the event of a power surge. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine