User’s Manual37Set the e-mail account information of your mail server.Please contact your Network Administrator for details andconfiguration settings.5.2.12 Camera5.2.12.1 Camera SetupTo set up your cameras, select “Main Menu” Camera Camera Settings to open the CAMERASETUP menu.CH Name: set up the name display of each channel.Position: display position of each channel.Color: Click to open sub-menu to adjust image brightness,saturation, contrast and hue settings of each channel.Display CH Image: enable to display the channel.Display Time: enable to show the time.Display Record Time: enable to show the time of therecord.Copy: Use the function to duplicate of one channel toanother.COLOR SETUP Menu allows you to adjust imagebrightness, saturation, contrast and hue of each channel.Click “APPLY” to and then click “OK” to save the adjustedsettings. Click “EXIT” to cancel the modification, or click“DEFAULT” to restore all settings to the factory defaultsettings.Privacy Zone: allows you to mask certain area(s) of thescreen to give you better privacy protection. Simplyenable the check box and then drag the box to the areathat you would like to mask.5.2.12.2 PTZTo configure the PTZ (Pan Tilt Zoom) function, click“Main Menu” “Camera” “PTZ”. The cameras thatcome with the kit do not support PTZ function, please referto the user’s manual of your PTZ cameras for propersettings. Please note the channel settings must matchthe settings of the PTZ camera.