Night Owl WNVR201 Series User Manual

Also see for WNVR-20B-81: User manual

Contents

Night Owl WNVR201 Series User Manual Manual pdf 51 page image

51Find network values and optimize connectivity based on your Internet connection. In most cases the valuesshould populate automatically once your NVR is connected to the Internet. The values in this section shouldonly be adjusted if you are an advanced user and have extensive experience in device networking.DHCP: Network configuration mode that gathers the network values automatically from DHCP server. Ifunchecked this value can be set manually.IP Address: Network address of the connected NVR.Subnet Mask: The range of IP addresses that can be found in the network. This should always be set to thedefault address 255.255.255.000.Gateway: The connection between two networks. This should always be the IP address of the connected router.MAC Address: The unique identifier assigned to network interfaces for communications at the data link layer.Preferred DNS: Domain Name System server address.Web Port: Allows access to your NVR with your computer through your LAN or the Internet. The default valueis 80.Network Bandwidth: Defines channel capacity, or the maximum throughput of the network interface.Net Diagnose Info: Allows you to Enable or Disable the network status availability.Network Status: Shows status of the network connectivity.8.1.2 Network ADVANCED