Night Owl Zeus-DVR Instruction Manual

Night Owl Zeus-DVR Instruction Manual Manual pdf 19 page image

User’s Manual176.2.1.2 MotionTo configure the Motion Detection function of theDVR, click “MAIN”  “Recording Functions”  “Motion”to enter the Motion Detect Setup window.Channel: Choose the channel you would like to configureto have specific motion detection function.Motion Detection: Enable or Disable Motion Detection ofthe selected channel.Sensitivity: Choose the level of sensitivity of motiondetection. 1 is the least sensitive.Detection Area: Click this button of the correspondingchannel to select the area you want to have motiondetection. The channel is separated into a 15*10 area.When any movements in the selected area are detected,recording or alarm will be triggered. The semi-transparentarea means no motion detection will be performed in thoseareas.Copy: Duplicate the setting of the selected channel toother channelsRed = Motion Detection EnabledClear = Motion Detection DisabledNOTE: You can click and drag the mouse cursor when selecting/deselecting the motionarea.6.2.1.3 AlarmTo configure the Alarm mode of each channel, click“Main Menu”  “Record Settings”  “Alarm” to enter into“ALARM SETUP” menu.Channel: Select the channel you would like to configureAlarm settingsI/O Status: Select between “NO” (Normal Open), “NC”(Normal Close), and OFF depending on your externalAlarm.Copy To: Use the function to duplicate the same setting ofone channel to another