Night Stick NSP-9842XL Instruction Manual

Night Stick NSP-9842XL Instruction Manual Manual pdf 1 page image

Instruction ManualNSP-9842XLTHANK YOU FOR SELECTING THE NIGHTSTICK NSP-9842XL!PLEASE SAVE THESE INSTRUCTIONSPlease read these instructions before using your 9842XL. They includeimportant safety and operation information.WARNINGSy NOT FOR USE IN HAZARDOUS LOCATIONS. Do not use this productin explosive atmospheres, near flammable liquids, or where explosion proofor intrinsically safe lighting is required.y DO NOT use this product in the proximity of vehicles or equipment whenthere is a risk of flammable liquids coming into contact with the flashlight.y Light can become hot while on. To prevent damage DO NOT cover orplace next to any potentially flammable materials while in use.y Keep out of the reach of children.CR-123 BATTERY CARRIERLoad two CR-123 Lithium batteries with the positive terminals pointing inthe direction of the arrow. NOTE: The flashlight cannot be charged with theCR-123 CARRIER installed.OPERATIONThe 9842XL has seven light modes: momentary flashlight, fullbrightness flashlight, medium brightness flashlight, low brightnessflashlight, floodlight, dual-light and strobe. The 9842XL has a unique tail-switch that operates both the flashlight and floodlight in one configuration.Momentary Flashlight ModeLightly press the upper raised portion of the tail switch (without clicking theflashlight on) for momentary operation. Release the switch to turn the light off.Constant-onFully press the upper raised portion of the tail switch until it clicks andthen release for constant-on in high-brightness mode. Press and release theswitch to turn the light off.Select Brightness LevelPress and hold down the upper raised portion of the tail switch. The lightwill cycle from high to medium to low and then back up again at a rate ofapproximately one mode per second. The light will continue to cycle up anddown through the various modes as long as the switch is held down. Whenthe desired brightness level is reached, simply release the switch, and thelight will remain in that brightness mode. Press and release the switch to turnthe light off.FloodlightPress the bottom recessed portion of the tail switch until it clicks and thenrelease for floodlight mode. Press and release the switch again to turn thelight off.Dual-LightDual-Light allows the user to turn on both the Flashlight (at any brightnesslevel) and the Floodlight, at the same time. First select the appropriatebrightness level of the flashlight using the directions above. Next press andrelease the bottom switch to activate the floodlight. Both the Flashlight andthe Floodlight are now running. Press and release both the upper and lowerswitches to turn the light off.Strobe FunctionFrom off or any mode, rapidly double click the upper raised portion of thetail switch to activate the strobe function running at full brightness. Press andrelease either switch to turn the light off.BAYCO PRODUCTS LIMITED LIFETIME WARRANTYWARRANTYBayco Products, Inc. warrants this product to be free from defects inworkmanship and materials for the original purchaser’s lifetime. The LimitedLifetime Warranty includes the LEDs, housing and lenses. Rechargeablebatteries, chargers, switches, electronics and included accessories arewarranted for a period of two years with proof of purchase. Disposable, non-rechargeable batteries are excluded from this warranty. Normal wear andfailures which are caused by accidents, misuse, abuse, faulty installation andlightning damage are also excluded.In the event that Bayco Products, Inc. receives notice that any productdoes not conform to its warranty, the original purchaser’s sole and exclusiveBayco Products, Inc. • 640 South Sanden Blvd. • Wylie, TX 75098 • 1-800-233-2155 • 1-469-326-9400 • www.mynightstick.comINS-9842XL-15Included in the box - Compris dans la boîte - Incluido en la caja

/ 4

Related manuals for Night Stick NSP-9842XL