NightStick MT-210 Instruction Manual
Bayco Products, Inc. • 640 South Sanden Blvd. • Wylie, TX 75098 • 1-800-233-2155 • 1-469-326-9400 • www.nightstick.comINS-MT-210-19Instruction ManualMT-210THANK YOU FOR SELECTING THE NIGHTSTICK MT-210!SAVE THESE INSTRUCTIONSPlease read these instructions before using this product. They includeimportant safety and operation information.WARNINGSy NOT FOR USE ABOVE HAZARDOUS LOCATIONSy DO NOT use in explosive atmospheres, near flammable liquids, or whereexplosion proof lamps are required.y DO NOT use in the proximity of vehicles or equipment when there is a risk offlammable liquids coming into contact with the flashlight.y DO NOT expose the batteries to water or salt water, or allow the batteries toget wet.y DO NOT store the batteries with metallic objects that may cause a short circuit.y Immediately discontinue use of the batteries if they emit an unusual smell, feelhot, change color, change shape or appear abnormal in any way.y Keep out of the reach of children.STROBE WARNINGExposure to strobing lights may cause dizziness, disorientation, and nausea.A very small percentage of people suffer from photosensitive epilepsy and mayexperience seizures or blackouts triggered by strobing lights. For more informationfrom the EPILEPSY FOUNDATION about photosensitivity and seizures, pleasevisit www.epilepsy.com. Anyone who has had symptoms linked to this conditionshould consult a doctor before using this product.OPERATIONThe MT-210 has five light modes: momentary flashlight, high-brightnessflashlight, medium-brightness flashlight, low-brightness flashlight and strobe. TheMT-210 has a single tail-cap switch providing access to all modes.MOMENTARY FLASHLIGHT MODELightly press the tail-cap switch for momentary operation. Release the switchto turn the light off. Because the MT-210 is a multi-function light, if the momentaryflashlight mode is activated within 2 seconds of having turned off the flashlight, thenext mode in the flashlight’s operation will be activated. If more than 2 secondshave elapsed since turning off the flashlight, the high-brightness mode will beactivated the next time the tail-cap switch is pressed.CONSTANT-ONPress the tail-cap switch until it clicks and then release for constant-on inhigh-brightness mode. Press and release the tail-cap switch again to turn the lightoff. Because the MT-210 is a multi-function light, if the constant-on flashlight modeis activated within 2 seconds of having turned off the flashlight, the next mode inthe flashlight’s operation will be activated. If more than 2 seconds have elapsedsince turning off the flashlight, the high-brightness mode will be activated the nexttime the tail-cap switch is pressed.SELECT BRIGHTNESS LEVELPress the tail-cap switch either partially (momentary mode) or until the tail-cap switch clicks (constant-on mode) multiple times in a row, and the flashlightwill cycle to the next mode in the flashlight’s operation (high-brightness, medium-brightness, low-brightness and strobe). At that point, the next press of the tail-cap switch (within 2 seconds) will start the flashlight’s mode over again with high-brightness. When the desired brightness level (or strobe mode) is reached, simplystop cycling through the brightness selection process. To turn the light off frommomentary mode, simply release the tail-cap switch. To turn the light off fromconstant-on mode, simply press the tail-cap switch one more time.WARRANTYLIMITED LIFETIME WARRANTYBayco Products, Inc. warrants this product to be free from defects inworkmanship and materials for the original purchaser’s lifetime. The LimitedLifetime Warranty includes the LEDs, housing and lenses. Rechargeable batteries,chargers, switches, electronics and included accessories are warranted for aperiod of two years with proof of purchase. Normal wear and failures which arecaused by accidents, misuse, abuse, faulty installation and lightning damage areexcluded.We will repair or replace this product should we determine it to be defective.This is the only warranty, expressed or implied, including any warranty ofmerchantability or fitness for a particular purpose.For a complete copy of the warranty, go to www.baycoproducts.com/bayco-product-support/warranties. Retain your receipt for proof of purchase.Mode d’emploiMT-210MERCI D’AVOIR CHOISI LA TORCHE ÉLECTRIQUENIGHTSTICK MT-210!VEUILLEZ CONSERVER CES INSTRUCTIONS.Veuillez lire ces instructions avant d’utiliser ce produit. Elles comprennent desinformations importantes liées à la sécurité et à l’utilisation de ce produit.AVERTISSEMENTSy NE PAS UTILISER AU-DESSUS D’ENDROITS DANGEREUX.y NE PAS utiliser ce produit dans une atmosphère explosive, à proximité deliquides inflammables, ou dans des endroits exigeant un éclairage antidéflagrant.y NE PAS utiliser ce produit à proximité de véhicules ou d’équipement quand desliquides inflammables pourraient entrer en contact avec la lampe torche.y NE PAS exposer les batteries à l’eau ou à l’eau salée, et ne pas laisser lesbatteries se mouiller.y NE PAS ranger les batteries à proximité d’objets métalliques qui pourraientcauser un court-circuit.y Arrêtez immédiatement d’utiliser les batteries si elles émettent une odeurinhabituelle, sont brûlantes au toucher, changent de forme, ou en cas de touteautre anomalie.y Ne pas laisser pas à la portée des enfants |
Related manuals for NightStick 017398803731
NightStick MT-230 Instruction Manual
NightStick MT-220 Instruction Manual
NightStick MT-200 Instruction Manual
NightStick MT-220 Instruction Manual
NightStick 2168 Instruction Manual
NightStick NSR-2070 Instruction Manual
NightStick TAC-410 Instruction Manual
NightStick NSP-4610 Instruction Manual
NightStick NSP-2422R Instruction Manual
NightStick NSR-2522RM Instruction Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine