Niigata seiki LS2-S170AD Instruction Manual
Also see for LS2-S170AD: Instruction manualInstruction manual
Lens ProtectiveCoverLED CoverPowertouch controlDimmingtouch controlAC Adapter jackLensViewable Area~170 105mmClamp Range ~10 to 60mmArm ClampArmUpper ~490mmLower ~480mmAC AdapterPlugClampArm CoverMakes work easy - Hands free; Well lit; Wide view.Thank you for purchasing the LS2-S170AD Arm Type Magnifier.Please read this manual thoroughly before use to insure proper operation and longservice.BEFORE USESPECIFICATIONSPART NAMES, DIMENSIONSHOW TO USEFor best results, and to prevent eye fatigue, adjust the Arm so that the Lens is parallel to thesurface you wish to inspect, and securely tighten the Clamp.The best lens position will depend on distance between eyes and the workpiece.To use the Light, Plug the AC adapter into the Power Jack and press the Power Switchto turn on power.Position unit so that external lights, such as the ceiling fixtures, are not reflected in thelens.Light power is controlled by using the buttons to adjust dimming.After use, close the lens protection cover, turn off the Power Switch, and unplug the ACadapter from the power source.Please Note: Due to product enhancements, appearanceand specifications are subject to change without notice.Power SupplyPowerBulbColor temp.Luminous PowerAC AdapterMain Unit MassArm LengthAC100 - 240V50 / 60 Hz AC Adapter included)~11W72x White LED~5,000K daylight~0 t o 950 lumenCord Length~1.5m~2.8 kgUpper ~490mm, Lower ~480mmTypeWhite Glass LensMagnification~ 2xViewable Area~ 170105mmHeadABSArm SteelArm CoverABSLED CoverPolycarbonateAC Adapter, Clamp,Lens ClothLensMaterialAccessoriesRead and Follow for Safe Use of ProductTo prevent electrical shock, always make sure the power is OFF andunplug the AC Adapter before assembly or attaching/detaching lens orcleaning the equipment.Never look at sun or bright light through the lens. There is risk of damageto eyesight.Do not expose lens to sunlight or intense light, there is risk of starting fire.Never leave lens in location where it can be exposed to direct or reflectedsunlight. Close the lens cover when not in use in order to prevent startingfire.Keep hands from moving parts on the arm. There is risk of pinchingfingers and injury.Only use with the provided AC Adapter.Handle with Care. Do not drop, scratch, or use strong force withproduct.(Use special care when cleaning.) Mishandling may lead toproductdamage and injury.Do not place the lens in water or rinse with water to clean. Water in longcontact with lens may cause mold or cloudiness.This product contains metal bearing surfaces and may produce traceamount of dust and powder due to repeated friction on metal surfac-es.Therefore, it is not suitable for clean-room applications. If there isconcern over exposing workpiece to contamination, do not use for thatapplication or take care not to reposition light while above workpiece.The clamp may scratch the desk surface and the movement of the lightmay cause scratches on the top of the desk. To prevent, place a protectivesheet or board between desk and clamp surface.Do not move the arm or lens housing beyond its limits. If overextended,the light may tilt and cause damage or accident.WARNINGCAUTIONPlease keep lens clean of dust and fingerprints.Clean lens gently with dedicated lens cloth. Do not wash with abrasivecleaners, or rinse with water.Keep lens protection cover in down position, and unplug AC Adapter whennot in use for extended period.CARE andSTORAGENOTESInstruction ManualLED ARM MAGNIFIERNiigata Seiki Co., Ltd.5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055Tel. : +81-256-33-5522 Fax. : +81-256-33-5518MAIL intl.sales@niigataseiki.co.jpURL http://www.niigataseiki.co.jp |
Related manuals for Niigata seiki LS2-S170AD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine