22XInsert a Memory CardThe camera stores pictures on Secure Digital (SD) memory cards (available separately).1 Turn the camera off.2 Open the card slot cover.Slide the card slot cover out (q) and open thecard slot (w).3 Insert the memory card.Holding the memory card as shown at right, slideit in until it clicks into place. The memory cardaccess lamp will light for a few seconds. Closethe memory card slot cover.If this is the first time the memory card will be used in the camera after beingused or formatted in another device, format the card as described on page 23.❚❚ Removing Memory CardsAfter confirming that the access lamp is off, turn thecamera off, open the memory card slot cover, andpress the card in to eject it (q). The card can then beremoved by hand (w).A Inserting and Removing Memory CardsAlways turn the camera off before inserting orremoving memory cards.D Inserting Memory CardsInserting memory cards upside down or backwardscould damage the camera or the card. Check to besure the card is in the correct orientation.Power switch4.0 GBFrontAccess lamp4.0GB
