Nikon AF-S NIKKOR 200mm f/2G ED VR II Manual

Also see for AF-S NIKKOR 200mm f/2G ED VR II: Brochure & specs User manual User manual

Contents

Nikon AF-S NIKKOR 200mm f/2G ED VR II Manual Manual pdf 26 page image

26JpEnDeFrEsSeRuNlItCkChKr■ The built-in flash and vignettingTo prevent vignetting, do not use the lens hood.CamerasVignetting occurs at any shooting distance.F65-Series/N65-Series*, F60-Series/N60*,F55-Series/N55-Series*, F50-Series/N50*,F-601/N6006*, Pronea 600i/6i*, Pronea S*Sold exclusively in the USA■ Using the lens hoodLens hoods minimise stray light and protect the lens.Attaching the hood• Fully tighten the lens hood screw (2).• If the lens hood is not correctly attached,vignetting may occur.• To store the lens hood, attach it in thereverse position.■ Slip-in filter holderAlways use a (52mm screw-on) filter. A 52mm Screw-on Neutral Color NC Filteris attached to the filter holder when shipped from the factory.1 Press down on the slip-in filter holder knob, andturn counterclockwise until the white line on theknob is at a right angle to the axis of the lens.2 Pull the slip-in filter holder from the lens body3 Detach the attached filter from the filter holder.4 Screw a filter onto the side of the filter holdermarked with the words “Nikon” and “JAPAN”.• The slip-in filter holder can be attached with the“Nikon” and “JAPAN” facing either the lens orcamera side without any effect on your pictures.Slip-in Circular Polarizing Filter C-PL3L (optional)• Blocks reflections from nonmetallic surfaces such as glass and water.• When a Slip-in Circular Polarizing Filter C-PL3L is attached, the focus distanceis different from when a 52mm screw-on filter is attached. The distance scaleis shifted from the correct position. The closest focused distance is extendedslightly.• The memory set position may change slightly when using focus preset. Attachthe C-PL3L filter before using the memory set function.