82More on PlaybackViewing Pictures on TVThe EG-E5000 audio/video cable included with the camera can be used toconnect the camera to a television or video-cassette recorder (VCR).Choosing a Video ModeThe Video mode item in the setup menu offers a choice of NTSC and PAL (144). Be sure that the mode selected matches the standard used in the videodevice. In PAL video mode, video output will be suspended and the cameramonitor will turn on when you shoot movies or take pictures at Ultra HS.1 Turn the camera off3 Tune the television to the video channelIf in doubt, consult the documentation foryour television or VCR.4 Select mode5 Turn the camera onThe camera monitor will remain off and thetelevision will display the image normallyshown in the monitor. If the camera is con-nected to a VCR, images can be recorded tovideo tape.2 Connect the audio/video cableInsert the black plug into the camera’s in-terface connector, the yellow plug into thevideo-in jack on the television or VCR. Con-nect the white plug to the audio-in jack.
