85Using GPS/Displaying MapsDisplaying MapsThe current position or image shooting location canbe displayed on the screen using the camera’s internalmap information.To display the map, press the U (map) button inshooting mode or playback mode.When Using Shooting ModeTo display the current position on the screen,press the U (map) button in shooting modewhen Record GPS data in GPS options of theGPS options menu is set to On.• To display the current position, the positioninformation must be obtained in advance.• To adjust the scale of the map, use the zoomcontrol (f (h)/g (i)).• To move the map display, press the multiselector H, I, J or K.B Map Display• The map display cannot be rotated. Only the north up display (the top of the screen indicates thenorth) is available.• The map display scale may vary depending on the country where the map is displayed.• In shooting mode, when Record GPS data in GPS options of the GPS options menu is set to Offor when positioning could not be performed, a world map centered on the region that was set inTime zone of Time zone and date in the setup menu (A94) is displayed.C Action ControlWhen the V (action) button is pressed, the current location can be displayed on a map by actioncontrol (A7).500mScale GPS receptionCurrentpositionLocation nameinformation (A84)
