60Connecting to Televisions, Computers, and PrintersConnecting to a ComputerUse the USB cable and PictureProject software supplied with your camera tocopy (transfer) pictures to a computer.Before Connecting the CameraInstalling PictureProjectBefore transferring pictures or movies to a computer, PictureProject must beinstalled. For more information on installing and using PictureProject, see theQuick Start Guide.Confirming USB OptionThe following two methods can be used to transfer pictures from the camerato a computer:• Press E (d) on the camera.• Click [Transfer] in PictureProject.The method used will depend on your computer’s operating system and theUSB option selected in the camera’s setup menu.1 This camera supports the USB mass storage device class (default setting [Mass storage])and Picture Transfer Protocol ([PTP]) USB transfer protocols.2 The camera’s E (d) button cannot be used to transfer pictures when the memory cardwrite-protect switch is in the “lock” position. Use the [Transfer] button in PictureProject.To use E (d) on the camera, unlock by sliding the switch to the “write” position beforetransferring pictures.3 If your computer is running Windows 2000 Professional, be sure to set the USB option to[Mass storage]. If [PTP] is selected, the Found New Hardware Wizard will be displayedwhen the camera is connected to the computer. Select [Cancel], close the window, anddisconnect the camera from the computer.Operating systemUSB option1E (d) on the camera 2 PictureProjectTransfer buttonWindows XP Home EditionWindows XP Professional Choose [Mass storage] or [PTP].Windows 2000 Professional 3 Choose [Mass storage].Mac OS X (10.3.9 or later) Choose [PTP]. Choose [Mass storage]or [PTP].
