44Shooting Featuress 3D photography• The camera captures one image for each eye to simulate a 3D image on a 3D-compatible TV ormonitor.• After taking the first picture by pressing the shutter-releasebutton, move the camera horizontally to the right so that thesubject is aligned with the guide on the monitor.The camera automatically captures the second image when itdetects that the subject is aligned with the guide.• The camera focuses on the area in the center of the frame forthe first shot.• The focus, exposure, and white balance are locked after thefirst shot, and R is displayed on the monitor.• The angle of view (i.e., the area visible in the frame) seen in thesaved image is narrower than that seen in the monitor at thetime of shooting.• Images captured in this mode are saved at an image size of n (1920×1080).• The two captured images are saved as a 3D image (MPO file). The first image (the left eyeimage) is also saved as a JPEG file.CancelCancelCancelGuideB Notes About Capturing 3D Images• Moving subjects are not suited to 3D photography.• 3D images have a less pronounced 3D feel as the distance between the camera and subject isincreased.• 3D images may have a less pronounced 3D feel when the subject is dark or when the secondimage is not aligned precisely.• Images captured under dim lighting may appear grainy with noise.• The telephoto zoom position is limited to the angle of view equivalent to that of up to a 134 mmlens in 35mm [135] format.• If you press the k button after capturing the first image, or if the camera does not detect that thesubject is aligned with the guide within 10 seconds, shooting is canceled.• If the camera does not capture the second image and cancels the shooting even when you alignthe guide with the subject, try manual shooting using the shutter-release button.• Movies cannot be recorded in 3D.
