46Shooting FeaturesUsing Macro ModeUse macro mode when taking close-up images.1 Press the multi selector I (p).2 Select ON and press the k button.• If a setting is not applied by pressing the k button withina few seconds, the selection will be canceled.3 Move the zoom control to set the zoom ratioto a position where F and the zoomindicator glow green.• When the zoom ratio is set to a position where F and the zoom indicator glow green, thecamera can focus on subjects as close as approximately 10 cm (4 in.) from the lens.When the zoom is at the position where G is displayed, the camera can focus on subjectsas close as approximately 1 cm (0.4 in.) from the lens.B Notes About Using the FlashThe flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.).C The Macro Mode Setting• The setting may not be available with some shooting modes.• The setting applied in A (auto) mode is saved in the camera’s memory even after the camera isturned off.M acro mode
