Technical Notes and IndexF15Nikon Transfer 2does not startwhen camera isconnected to acomputer.• The camera is off.• The battery is exhausted.• The USB cable is not correctly connected.• The camera is not recognized by the computer.• The computer is not set to start Nikon Transfer 2automatically. For more information about NikonTransfer 2, refer to help information contained inViewNX 2.222293,96–96The PictBridgescreen is notdisplayed whenthe camera isconnected to aprinter.With some PictBridge-compatible printers, thePictBridge screen may not be displayed and it may beimpossible to print images when Auto is selected forthe Charge by computer option. Set the Charge bycomputer option to Off and reconnect the camera tothe printer.92,E71Images to beprinted are notdisplayed.• The memory card contains no images. Replace thememory card.• Remove the memory card to print images from theinternal memory.2021Cannot selectpaper size withcamera.The camera cannot be used to select the paper size inthe following situations, even when printing from aPictBridge-compatible printer. Use the printer to selectthe paper size.• The printer does not support the paper sizesspecified by the camera.• The printer automatically selects the paper size.E16,E18–Problem Cause/Solution A