21Inserting Memory CardsFirst StepsRemoving Memory CardsBefore removing memory cards, turn the camera offand confirm that the power-on lamp and monitor areoff. Open the battery-chamber/memory card slot coverand press the card in 1 to partially eject the card 2.The card can then be removed by hand.B Formatting Memory CardsIf the message at right is displayed, the memory card must beformatted before use (A 125). Note that formatting permanentlydeletes all pictures and other data on the memory card. Be sure tomake copies of any pictures you wish to keep before formatting thememory card.Use the multi selector to choose Yes and press k. The confirmationdialog will be displayed. To start formatting, choose Format and press k.• Do not turn the camera off or open the battery-chamber/memory card slot cover untilformatting is complete.• The first time you insert the memory cards used in other devices into the COOLPIX P80, be sure toformat them (A 125) with this camera.B The Write Protect SwitchSD memory cards are equipped with a write protect switch.Pictures cannot be recorded or deleted and the memory cardcannot be formatted when this switch is in the “lock” position.Unlock by sliding the switch to the “write” position.B Memory Cards• Use only Secure Digital memory cards.• Do not perform the following during formatting, while data is being written to or deleted from thememory card, or during data transfer to a computer. Failure to observe this precaution could resultin the loss of data or in damage to the camera or memory card:- Eject the memory card- Remove the battery- Turn off the camera- Disconnect the AC adapter• Do not disassemble or modify.• Do not drop, bend, or expose to water or strong physical shocks.• Do not touch the metal terminals with your fingers or metal objects.• Do not affix labels or stickers to the memory card.• Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures.• Do not expose to humidity, dust, or to corrosive gases.Card is not formatted.Format card?NoYesWrite protect switch
