Nikon COOLPIX S3200 Reference Manual

Contents

E19Connecting the Camera to a Printer (Direct Print)Reference SectionConnecting the Camera to a Printer1 Turn off the camera.2 Turn on the printer.• Check printer settings.3 Connect the camera to the printer using the included USB cable.• Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle,and do not use force when connecting or disconnecting the plugs.4 The camera is automatically turned on.• When properly connected, the PictBridge startupscreen (1) will be displayed in the camera monitor,followed by the Print selection screen (2).B If the PictBridge Screen is not DisplayedTurn off the camera and disconnect the USB cable. Set Charge by computer (E62) in thecamera’s setup menu to Off, then connect the camera again.Print selection1 5 / 0 52 0 1 21 2