21Step 1 Turn the Camera OnBasic Steps for Shooting and PlaybackTurning the Camera On and Off• When the camera is turned on, the power-on lamp (green) will light, and thenthe monitor will turn on (the power-on lamp turns off when the monitor turnson).• To turn off the camera, press the power switch. When the camera is turned off,both the power-on lamp and the monitor turn off.• To turn on the camera in playback mode, press and hold the c (playback)button. The lens will not extend.C Power Saving Function (Auto Off)If no operations are performed for a while, the monitor will turn off, the camera will enter standbymode, and the power-on lamp will flash. If no operations are performed for approximately anotherthree minutes, the camera will turn off automatically.To reactivate the monitor while the power-on lamp is flashing, press any of the following buttons:- Power switch, shutter-release button, A (shooting mode) button, c (playback) button, or b(e movie-record) button.• The time allowed to elapse before the camera enters standby mode can be changed from theAuto off option (A87) in the setup menu (A86).• By default, the camera enters standby mode in about one minute when you are using shootingmode or playback mode.• When the AC Adapter EH-62G (available separately) is used, the camera enters standby mode after30 minutes (fixed).9 5 09 5 08 m 0 s8 m 0 sFlashesNo operationsperformedNooperationsperformed3 minCamera enters standbymodeCamera turns offDownloaded from www.Manualslib.com manuals search engine
