14Camera OperationsCamera OperationsTurning the Camera on and OffTo turn the camera on, press the power switch. The power-on lamp will light…To turn the camera off, press the power switch and wait for the power-on lamp toturn off.Turning the Camera on (Playback Mode)If the button is pressed for about a second when the camera is off, the camera will turnon in playback mode ( 41).Auto Power off (Stand-by Mode)In shooting mode, the monitor will dim to reduce the drain on the battery if no operationsare performed for about fi ve seconds. The monitor will brighten when camera controls areused. At default settings, the monitor will turn off altogether if no operations are performedfor about a minute during shooting and playback (stand-by mode; 75). The camera willturn off automatically if no operations are performed for another three minutes.…and the monitor will turn on.Power switchPower-on lampOn Camera on.Blinks Monitor has turned off to save power (see below).Flickers Battery exhausted. Recharge or change battery.Off Camera off.Internal memory/memory card indicator ( 12)Pictures will be recorded to internal memory.Pictures will be recorded to memory card.Shooting mode( 5, 18, 26, 32, 35)Number of exposures remaining ( 88)Image mode ( 61) Flash mode ( 20)Battery indicatorNO ICON Battery fully charged.Low battery; prepare to recharge or change battery.WARNING!! BATTERYEXHAUSTED Battery exhausted. Recharge or change battery.