79Shooting Smiling Faces (Smart Portrait Mode)More on Shooting6 q Touch shootingCan be changed between touch shutter (A 47) and touch AF/AE (A 52). Thissetting is not available when Smile timer is set to On.7 e Skin softeningEnable skin softening. When the shutter is released, the camera detects one or morehuman faces (up to three), and processes the image to soften facial skin tonesbefore saving the image.The degree of skin softening applied can be selected from High, Normal (defaultsetting), and Low. When Off is selected, the skin softening function is disabled.• The effects of skin softening are not visible when framing pictures for shooting.Check the degree of skin softening performed in playback mode.8 y Blink proofWhen On is selected, the camera automatically releases the shutter twice each timea picture is taken. Of the two shots, one in which the subject’s eyes are open issaved.• If the camera saved an image in which thesubject’s eyes may have been closed, the dialogshown on the right is displayed for a few seconds.• When On is selected, the flash is disabled.• The default setting is Off.9 a Smile timer• On (default setting): The camera uses the face detection function to detect ahuman face, and then automatically releases the shutter whenever a smile isdetected.• Off: The camera does not release the shutter automatically with smile detection.Press the shutter-release button to take a picture.10 Y Wind noise reductionSet whether or not to reduce wind noise during movie recording (A 132).11 n Movie AF modeSelect how the camera focuses during movie recording (A 128, 131).12 D Movie optionsSelect the desired movie option when recording movies (A 128, 130).A blink was detected in thepicture just taken.C Settings in Smart Portrait ModeThere are functions with which this setting cannot be enabled. See “Camera Settings That Cannot BeApplied Simultaneously” (A 80) for more information.
