63Connecting to Televisions, Computers, and PrintersConnecting to a TVConnect the camera to a television using the A/V cable to play back pictureson the television.1 Choose [NTSC] or [PAL] to match your TVvideo standard (c 106) and then turn offthe camera.2 Connect the A/V cable.Connect the yellow plug to the video-in jack on the TV, and the white plug to theaudio-in jack.3 Tune the television to the video channel.See the documentation provided with your television for details.4 Press o for one second to turn onthe camera.The camera monitor will remain off and the imagenormally shown in the monitor will be displayed onthe television.j Connecting an A/V Cable• When connecting the A/V cable, be sure that the camera connector is oriented correctly.Do not use force when connecting the A/V cable to the camera. When disconnecting theA/V cable, do not pull the connector at an angle.• Do not pinch the connector cover between the camera’s A/V connector and the A/V cableconnector when connecting the cable to the camera.Video modeExitNTSCPALWhiteYellow