I_I (Auto) ModeOption " DescriptionImage mode 71White balanceMeteringISO sensitivitySet the combination of image size and image quality to berecorded (_71). The default setting is [] 4608x3456.This setting is also applied to other shooting modes.Adjust colors in the image closer to the colors as theyappear to the eye. Although Auto (default setting) can beused under most types of lighting, you can apply the whitebalance setting suited to the sky conditions or light sourceto achieve better results if the default setting results areunsatisfactory.• When the white balance setting is other than Auto orFlash, set the flash mode (_)60) to _) (off).Select the method that the camera uses to measure thebrightness of the subject.The camera adjusts theexposure, which is a combination of shutter speed andaperture value, based on the brightness measurement. Thedefault setting is Matrix.Higher ISO sensitivity allows you to take pictures of darkersubjects. Additionally, even with subjects of similarbrightness, pictures can be taken at faster shutter speeds,and blurring caused by camera shake and subjectmovement can be reduced. When ISO sensitivity is set toAuto (default setting), the camera sets the ISO sensitivityautomatically.• With the Auto setting, _) ([_)26) is displayed on theshooting screen when the ISO sensitivity is automaticallyincreased._33_35Choose how the focus area is determined from Facepriority (default setting), Auto, Manual, Center, orSubject tracking.When Single AF (default setting) is selected, the camerafocuses only while the shutter-release button is pressedhalfway. When Full-time AF is selected, the camerafocuses even when the shutter-release button is not_ressed halfway. You may hear the sound of the camerafocusing._36AF area mode @'_37Autofocus modeo5"Loea[] Features That Cannot Be Used SimultaneouslyThis feature may not be used in combination with certain features ([_73). 37