38Connections—Connecting to a Television or VCRConnecting to a Television or VCRTelevision PlaybackUsing the video cable provided with your camera, you can connect the COOLPIX2000 to a television or VCR.1 Turn the camera offTurn the camera off before connecting or disconnecting the video cable.2 Connect the video cable to the cameraInsert the pin jack into the camera’s video outconnector.3 Connect the video cable to the video deviceConnect the other end of the cable to the video-in jack on the television or VCR.Use an AC AdapterTo prevent the display in the television from turning off whenever the cameraenters sleep mode, connect the camera to an EH-53 AC adapter (availableseparately).Choosing a Video Mode ( 76)The Video Mode item offers a choice of NTSC and PAL standards for videooutput. Be sure that the standard selected matches that of any video deviceto which you connect the camera.4 Tune the television to the video channel5 Turn the camera onThe television will show the image normally displayed in the monitor. Thecamera monitor will be blank.VIDEO
