16On Screen Display (OSD)The indications displayed on the LCD screen will tell you the operation status of the DigitalCamera.REC ModePlayback Mode2, 3110 FINERECLIGHTFunction StatusImage Pages left inmemory and ImageResolution selected;FINE (Fine), NORMAL(Normal), ZOOM (Zoom),WIDE (Wide), or MULTI(Multi).P10 FINEDisplayed Image Page and its Image ResolutionFINE (Fine), NORMAL (Normal), or WIDE (Wide).• If the image is captured in ZOOM mode, thedisplayed Image Resolution will be NORMAL.• If the image is captured in MULTI mode, thedisplayed Image Resolution will be FINE.To Cancel the OSD1 Set the POWER switch to REC orPLAY.• The LED Lamp lights up.2 Press OSD repeatedly until the OnScreen Display disappears.3To resume the On Screen Display,press OSD until it reappears.• Only Warning indications and RECindication will be displayed on the LCDViewfinder if the OSD is cancelled.• The OSD feature will be in on modeeach time the Digital Camera ispowered on.FULLEMPTYAs the Battery is depleted,the indication changes.LED Lamp will flash whenbattery is empty.Battery Condition“LIGHT” will appearwhen the light level isinadequate. In thiscase, more lightshould be provided oruse speedlight (Seepage 13) to achievebetter picture qualityand color.Low Light Warning10 FINE +−BRIGHTJAN 29 1998PressOSDPressOSDReturns to OSD ONmode if, after 5 seconds,no selection is made.Returns to OSDON mode after5 seconds.(PLAY mode)On Screen Display OrderPressOSDLEDLamp