Nikon Firmware Update for Coolpix 800 Version 1.1Notes:1. It is most important that you follow the supplied directions; failure to followall of the steps may result in your camera being disabled.2. This update is for Coolpix 800 cameras only! It is strongly suggested thatyou avoid any background process that may disrupt the Updatercommunication process.3. It is advised not to touch the mouse or keyboard once the uploader startsto ensure against accidental launch of an application or other process.4. This Software and Firmware is Licensed and Copyright of NikonCorporation Japan1.0 System requirementsMacintosh users:Mac® OS 7.1 or laterVerified models:Power Macintosh 7600/133Power Macintosh 9600Power Macintosh 7100/80AVPower Macintosh G3Power Macintosh 9600Power Macintosh PerformaPower Book G3Power Macintosh 8500/132*The software application does not operate properly with the PowerBook 1400 or on Macintosh computers that do not have an originalserial port fitted such as the iMac or G4Windows Users1. Microsoft Windows 952. Microsoft Windows 983. Microsoft Windows 98SE4. Microsoft Windows NT 4.02.0 About software and firmwareThe “Firmware Uploader Software for the E800 Ver.1.1” is a computerprogram that updates the firmware in your COOLPIX 800 (E-800). Thefirmware is a program, which runs inside the camera and controls itsoperation. By running the Uploader Software you will install the new firmwarein the camera.The process of transferring the new firmware from the computer to thecamera is sometimes called “Uploading,” “Upgrading” or “Updating” thefirmware.