Nikon CoolPix 995 User Manual

Also see for COOLPIX 995: Owner's manual Software guide User manual HELP Instructions

Nikon CoolPix 995 User Manual Manual pdf 78 page image

155Connecting to a television or VCRptional)dapter plug to thets rated at 100-charger (8.4V, 1.3A).sure that the Modecharger.plugged in for ae sure that theor the flash sync1 Open the Video output connector/USB connector cover asshown.2 Connect the video cable provided.• Insert the black plug on the video cable into the camera's video outputconnector, and connect the yellow plug to the video-in jack on the televisionor VCR. Note that the Video input connector is not the same as theconnector used to connect your TV or VCR to an antenna or aerial.• When the Monitor is turned off, shooting (text) information will not bedisplayed on the television screen.• To prevent the camera from turning off during extended Video viewing orrecording, use the optional AC adapter.• Auto Power Off (p. 175) for the Monitor is fixed at 30 minutes when the ACadapter is connected. However, when the video cable is connected, theCOOLPIX995 will not turn off automatically and the video output will continueuntil the camera is turned off manually.• The Video Mode item in the SET-UP menu (p. 135) offers a choice of NTSCand PAL standards for video output. Select a standard that matches thatused in your television set. Note that when the PAL video standard isselected, the Monitor will turn off when the camera is connected to a videodevice. While recording in Ultra HS or Movie mode (p. 99), the Monitor willbe used for display and video output will be suspended.You can connect the COOLPIX995 to a television or VCR to displayimages on a TV monitor or make a recording on a VCR using theprovided video cable.MODEVideo output connectorUSB connectorh the EH-21 ACwhen it is installedConnections