Nikon Coolpix 4300 Repair Manual

Also see for COOLPIX 4300: User guide Quick start guide

Contents

VAA12901-R.3594.A- A7 ･ E4300 -ADJUSTMENT1. EquipmentIBM compatible PC • AC adapter EH-21 • USB cable ( UC-E1) • Oscilloscope2. Servicing Tools• Pattern Box •Color Meter •Luminance Meter • Siemens star chart • Calibration software3. Adjustment Items and Order1. Lens Adjustment2. AWB Adjustment3. CCD White Point Defect Detect Adjustment4. CCD Black Point Defect Detect Adjustment5. USB Storage information registration6 LCD Panel Adjustment7-1. LCD H AFC Adjustment7-2. LCD RGB Offset Adjustment7-3. LCD Gain Adjustment7-4. LCD Blue Brightness Adjustment7-5. LCD Red Brightness AdjustmentNote) If replacing the lens, CCD, optical filter, CA-1 or CP-1 board, it is necessary to perform the above 1-5adjustments. 2-5 adjustments other than these should be carried out in sequence.4. Setup1) System requirements• Windows98® , Me, 2000 or XP• IBM-compatible PC with Pentium processor• CD-ROM drive• 3.5-inch high-density diskette drive• USB port• 40 MB RAM• Hard disk drive with at least 15 MB available• VGA or SVGA monitor with at least 256-color display2) Installing calibration software• Insert the calibration software installation diskette into your diskette drive.• Open Explorer.• Copy the DscCalDI_128 folder on the floppy disk in the FD drive to a folder on the hard disk.