2.2 Insert the included EN-EL 19 battery(rechargeable Li-ion battery).• Use the battery to push the orange batterylatch up tn the direction indicated by thearrow and fully ir1sert the battery ((2)).• When the battery is inserted correctly, thebattery latch will lock the battery in place.Lt, Inserting the Battery CorrectlyInserting the battery upside down orbackwards could damage the camera.Battery latchBe sure to check that the battery is in the correct orientation.2.3 Insert the memory card.• Slide the memory card itl until it clicks tntoplace.Lt. Inserting the Memory Card CorrectlyInserting the memory card upside down orbackwards could damage the camera or thememory card. Be sure to check that the memorycard is in the correct orientation.First StepsMemory card slot2.4 Close the battery-chamber/memory card slot cover.Removing the Battery and Memory CardTurn the camera off and be sure that the power-on lamp and the monitor have turned offbefore opening the battery-chamber/memory card slot cover.• The camera, battery, and memory card may be hot immediately aftor ustng the camera.Observe caution when removing the battery or memory card.Removing the BatteryTo eJect the battery, open the battery-chamber/ memory card slotcover and sltde the orange battery latch up in the dtrectionindicated by the arrow ((D). The battery can then be removed byhand(@) Do not pull it at an angle.Removing the Memory CardGently push the memory card into the camera to parttallyeject the card, and then remove the card. Do not pull it at a11angle.First StepsI
