211Technical NotesAccessories6 Press and hold (for at least 3 seconds) the power button on theremote control.• Pairing starts for the camera and remote control. During the process, the statuslamp on the remote control flashes about every 0.5 seconds.• When pairing is complete, a connection isestablished between the camera and theremote control. When you enter shootingmode, M is displayed on the shooting screen.• If a pairing failure message is displayed,perform the procedure again from step 5.Switching the Connection to a Smart Device• Switch the connection from Remote control to Smart device in Chooseconnection in the camera network menu (A158, 210).• When the SnapBridge app is launched on your smart device, and a connection isestablished between the camera and smart device, L is displayed on the shootingscreen.• When establishing a wireless connection with a smart device for the first time, seethe included “SnapBridge Connection Guide”.1 / 2 5 01 / 2 5 0 F 3 . 4F 3 . 4 5 0 05 0 02 5 m 0 s2 5 m 0 s0 . 00 . 01 0 01 0 0
