101Basic Camera Setup: The Setup MenuShooting, Playback, and Setup Menush Sound SettingsAdjust the following sound settings:i Auto OffTo reduce the drain on the batteries, the monitorturns off and the camera enters standby mode, ifno operations are performed for a certain period oftime. The camera will turn off automatically if nooperations are performed for three minutes afterentering standby mode.j Auto OffRegardless of the option selected, the monitor will remain on for a minimum of three minuteswhen menus are displayed, and for thirty minutes during a slide show.Button soundWhen [On] (default setting) is selected, beep will sound once when operationsare completed successfully, three times when error is detected.Shutter soundChoose shutter sound from [On] (default setting) and [Off].VolumeChoose volume of shutter sound and start-up sound from [Loud], [Normal](default setting), and [Off].Auto offChoose the time allowed to elapse before the camera enters standby mode if nooperations are performed from [30s] (default setting), [1m], [5m], and [30m].Sleep ModeIf [On] (default setting) is selected, the camera will enter standby mode whenthere is no change in the brightness of the subject, even before the timeselected in the auto off menu has elapsed.The camera will enter sleep mode after 30 seconds when [Auto off] is set to[1m] or less, or after 1 minute when [Auto off] is set to [5m] or more.• If no operations are performed for fifteen seconds when the auto off is set to[30s] and sleep mode is [On], the monitor turns off and the power-on lampblinks. If no operations are performed for another fifteen seconds, the cam-era enters standby mode.Sound settingsShutter soundVolumeButton soundMENU ExitAuto offAuto offSleep modeExit