55Connecting to a ComputerConnecting to Televisions, Computers and Printers5 Transfer pictures when Nikon Transfer has finished loading.Click [Start Transfer] in Nikon Transfer. At the default setting, all pictures are transferredto the computer.At the NikonTransfer default setting, the folder to which pictures are transferred isautomatically opened when transfer is complete.For more information on using Nikon Transfer, refer to help information contained inNikon Transfer.6 Disconnect the camera when transfer is complete.Turn the camera off and disconnect the USB cable.For Users of Windows 2000 ProfessionalUse a card reader or similar device to transfer the pictures stored on thememory card to the computer.If your memory card has a capacity greater than 2 GB, the intended devicemust support the memory card.• At the Nikon Transfer default settings, Nikon Transfer will startautomatically when a memory card is inserted into the card reader orsimilar device. See step 5 above to transfer pictures.• Do not connect the camera to the computer. If the camera is connectedto the computer, the [Found New Hardware Wizard] dialog will bedisplayed. Select [Cancel], close the dialog, and disconnect the camerafrom the computer.• To transfer pictures stored in the camera’s internal memory to thecomputer, the pictures must first be copied to a memory card using thecamera (A 92).
