F9Technical Notes and IndexMonitor is hard to read.• Select Monitor settings > Brightness in thesetup menu and adjust the monitor brightness.• The monitor is dirty. Clean the monitor.24, E64F7Date and time of recordingare not correct.• If the camera clock has not been set, O flashesduring shooting and movie recording. Images andmovies saved before the clock is set are dated “00/00/0000 00:00” or “01/01/2014 00:00” respectively.Set the correct time and date from the Time zoneand date option in the setup menu.• The camera clock is not as accurate as ordinarywatches or clocks. Periodically compare the time ofthe camera clock with that of a more accuratetimepiece and reset as required.8, 24,E62No indicators displayed inmonitor.Hide info is selected for Photo info in Monitorsettings in the setup menu. 24, E64Print date not available. Time zone and date has not been set in the setupmenu.8, 24,E62Date not imprinted onimages even when Printdate is enabled.• The current shooting mode does not support Printdate.• The date cannot be imprinted on movies.E66Screen for setting time zoneand date is displayed whencamera is turned on. The clock battery is exhausted; all settings wererestored to their default values. 8, 11Camera settings reset.Camera becomes hot.The camera may become hot when used for anextended period of time to shoot movies or sendimages using an Eye-Fi card, or when used in a hotenvironment; this is not a malfunction.–Camera makes sound.When Autofocus mode in the movie menu is set toFull-time AF or while in some shooting modes, thecamera may produce an audible focusing sound.24, E60Problem Cause/Solution A
