r_F,"mzrDIf the camera fails to function as expected, check the list of common problemsbelow before consulting your retailer or Nikomauthorized service representative.Refer to the page numbers in the right-most column for more information.Display, Settings and Power SupplyProblem '_°_....... Cause/Solution [_[_]Monitor is blank. Camera is off. 20Battery is exhausted. 20Standby mode for saving power: press the power 15,21switch, the shutter-release button, the I_1 button, orthe [] button.When flash lamp blinks red, wait until flash has charged. 29Camera and computer are connected via USB cable. 81Camera and TV are connected via AV cable. 79interval timer photography in progress. 98Monitor is hard to read. Adjust monitor brightness. 118• Monitor is dirty, dean monitor. 133Camera turns off without Battery is low. 20warning. • Camera has turned offautomaticaHy to save power. 122• Battery is cold. 132Date and time of Pictures recorded before clock has been set, and 16, 48recording are not correct. "Date not set" indicator blinks during shooting, willhave time stamp of %0/00/0000 00:00"; movies andvoice recordings will be dated "01/01/2009 00:00." Incalendar display or list by date mode, pictures arerecognized as having been taken on 01/01/2009. Setthe correct time and date from the Date option inthe setup menu.Check camera clock regularly against more accurate 115timepieces and reset as required.Hide info is selected for Photo info. 118Select Show info.Camera clock has not been set.No indicators displayedin monitor.Date imprint notavailable.16,115138